1, instrument instructions check
2, manipulation flexibility check
★ Check the standard: variable speed control handle and work device control handle light and flexible, no stuck.
★ Warning: high-speed driving, can not suddenly speed, should first brake speed, and then speed. To change the direction of travel, you must first brake, until the machine stops and then change the gear. Do not drop the bucket with a floating position.
3, steering performance check
★ check the standard: the engine speed (1000rpm) state, left and right to flexible, no turning heavy, lag, swing, abnormal sound, deviation and so on.
4, the brake effect check
★ driving brake standard: dry and smooth cement pavement to 24km / h speed, the braking distance of not more than 9m.
★ parking brake standard: pull the hand brake, can be stopped at the slope of 11.2 °.
5, the engine running check
See the engine smoke; listen to the engine sound.
★ Note:
◎ can not suddenly accelerate the engine during the warm-up phase.
◎ can not let the engine in the gear on the continuous operation of more than 20 minutes.
◎ can not let the engine run idle for a long time.
6, gearbox oil level inspection
★ engine idle running 5 minutes, open the oil valve out of the oil.
7, light inspection
|
